I’m in a class called Introduction to Robotics. In this class we have labs where we make robots to do things using the LEGO NXT Mindstorms kits. (Part of) Our current assignment is to make a robot that can follow a fairly complex line. In our team, I’m the Mechanical Engineer, so I built the robot. Our Computer Scientist, Rich, wrote a really sweet line following program based on the general algorithm our group came up with.
I’m not going to reveal the black magics he used in his program, or our general algorithm, but, from the video you can probably deduce the general idea. The line it follows is complex, containing both a 90 degree bend and a hairpin. As you can also see in the video, the robot could follow this line indefinitely until its batteries die.
I managed to get a gallery of a step-by-step build of the MicroColony/Build18 sensor board uploaded. This post details the sensor board itself a bit better.
We plan on building a better one that uses a multiplexor to allow us to have more than 5 sensors on the board.
During Build 18 I managed to slap together a simply chassis for our micro colony robots. It was super simple, made of some plastic and hot glue, but, it was able to hold everything on it.
Here are some pictures:
As you can see it isn’t very big, not much larger than my cell phone. I used 3 4-40 machine screws which let us slide the sensor board into place and tuck all of the electronics underneath. I really like the 4-40 screws for stacking feature and it is something I would like to retain for the next revision of our chassis.
The next revision will also have a mount for the servos, instead of them just being tacked in place with hot glue. It was a quick and dirty build, but, it got the job done.
Earlier this evening the Stairbot Team (a CMU Robotics Club project I head) began construction of our robot. Thus far we have only done initial part sizing (machining stock down to the size we will need for the part). Below are pictures of the machined parts and the schematic for them. The schematic was created by Mike Ornstein who has done all of the CAD work for Stairbot thus far. Our grant submission can be found on his site: here.
I’ll follow up with more details about Stairbot later this week.
[nggallery id=7]
