CAD for Hobbyists: Onshape

Onshape - Web Based CAD
Onshape – Web Based CAD

Onshape is the first sketch/feature based modeler we are looking at in this series.  To create a part, you create a 2D sketch to define a feature.  Subsequent features are then built on top of one another.  This is the same modeling paradigm that is used by many professional CAD programs (Solidworks, Inventor).  The thing that really sets Onshape apart from these programs is the fact that it is completely web-based.

Continue reading CAD for Hobbyists: Onshape

CAD for Hobbyists: Some Background

In my previous post in the series I talked about my experience with CAD and some platforms that are available for Hobbyists. What I did not discuss was the history of CAD software and some of the key concepts that may differentiate one platform from another.  However, I am not going to write the unabridged history of CAD, if you want to read that, I highly recommend going to Wikipedia and falling down the rabbit hole.

First, what do I mean when I say CAD?  CAD, or Computer Aided Design, is a rather broad topic.  It encompasses pretty much any software that can be used to aid in the process of designing something.  This could range from PCB layout software (such as EAGLE or KiCAD) to a 2D drafting package (LibreCAD, AutoCAD, etc) to a full 3D modeling suite (Inventor, Solidworks, Fusion360, etc).   I prefer to think of each of these as ECAD, 2D CAD, and 3D CAD respectively.   Based on the content of the first post in the series it should be no surprise that when I say CAD I am referring to 3D CAD, or more specifically a 3D CAD modeling package.  It should also be noted that there is an entire other world of CAE, or Computer Aided Engineering, software out there.  This consists of specialty automated design and simulation software.  While CAD software can be classified under the CAE umbrella, I am not going to talk about much about CAE software in this series.

Continue reading CAD for Hobbyists: Some Background

CAD for Hobbyists: An Introduction

This post is the first of a series on CAD for Hobbyists.  Be sure to check back for more posts in the series.

I get to use CAD software almost everyday.  There are so many programs currently available it can be hard to choose one.  At work, I alternate between two of the larger players in the CAD game, Inventor and Solidworks, dependent on client needs.  I’ve been using both off and on since the mid-2000s, and over the years I’ve seen each one add a ton of features (and fix a ton of bugs).  More often than not, when one of them adds a great feature, in the next year or two the other will add a similar feature leveling the playing field in the CAD software feature arms race.  With the current versions of both packages it is hard to say who is currently ahead.  Certainly, each package has its quirks and you have to take a minute to adjust to how each functions, but to the average user the packages offer the same features.

Continue reading CAD for Hobbyists: An Introduction